Welcome Guest [Log In] [Register]
Welcome to Advanced Robot Combat. We hope you enjoy your visit.

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

Join our community!

If you're already a member please log in to your account to access all of our features.

Username:   Password:
Add Reply
  • Pages:
  • 1
  • 7
CAD Request Thread
Topic Started: May 14 2009, 07:00 PM (2,713 Views)
Area51Escapee
Member Avatar
Root Admin Wannabe
Now that I have some time, I can do a few requests as long as there are not too many.

If you want me to help you out, gimme a simple description but try not to go into excessive detail. If there's a concept that's hard to describe in words, a simple word pic might be helpful. It's all up to you but if you need the help, I'll be around.
"If you're talking about time travelling bunnies...then yes." - Ben, LOST
Offline Profile Quote Post Goto Top
 
britespark
Dan
If I send ya a paint pic through PM, any chance you could CAD it for me? :)
Offline Profile Quote Post Goto Top
 
Area51Escapee
Member Avatar
Root Admin Wannabe
Go for it!
"If you're talking about time travelling bunnies...then yes." - Ben, LOST
Offline Profile Quote Post Goto Top
 
lewis
Middleweight
I know this is annoying for everyone who does CADS, bit I have no way of making any decent images for my robots. If anyone would do a CAD or any old image really then I have descriptions below

LW: Thwedge

Very simple really, it's a box that is wide rather than long, about 60cm wide and 25cm long. There are two exposed wheels on either side of the box that are bigger than the robot itself, plus a hinged wedge at the front of the robot, hinged so that it will flop over when flipped. Then at the rear there is a Toe Crusher-style pick axe, but with four spikes, one in each direction, so that it can perform overhead and horizontal thwacks. This arm is connected to an Overkill style drum that is visible at the back of the box, so it can perform overhead thwacks even when inverted. The whole robot body is dark blue, but the name is written on top in red and the hinged wedge is gold. The thwacking arm is grey.

MW: Hyper-Ventilate 1.2

All you need from those stats really are the shape, colour, dimensions and weaponry. It is the 2nd post on the page.

HW: Compression 1.1

All you need from those stats really are the shape, colour, dimensions and weaponry. It is the 2nd post on the page.

SHW: Inflammatory Slammer

All you need from those stats really are the shape, colour, dimensions and weaponry. It is the 2nd post on the page.

Thank you very much if you have the time or motivation to do them :)
Team Mechanical Menagerie
...prepare to be compressed
Offline Profile Quote Post Goto Top
 
That Kode Guy
Member Avatar
Ruiner of All
LEWIS! Good to see you, mate! :)
Posted Image

Team Covenant stuff
Offline Profile Quote Post Goto Top
 
lewis
Middleweight
...It's me again ... :P But I'm asking for slightly less as I already have a heavyweight

Chris is doing an adjustment to my SHW CAD for me, and Kody was going to do my LW and MW but he has had to withdraw those offers, I was just wondering if anyone has the time to do one or both of the remaining CADS? Just post here/PM me and I'll PM you the details and hopefully a crappy paint pic to help.

Thanks :)
Team Mechanical Menagerie
...prepare to be compressed
Offline Profile Quote Post Goto Top
 
Area51Escapee
Member Avatar
Root Admin Wannabe
After I finish with your SHW and some of the other requests, I can try to do your others possibly. You can post the descriptions here just in case I decide to or PM them to me. Either way, that'd be great.
"If you're talking about time travelling bunnies...then yes." - Ben, LOST
Offline Profile Quote Post Goto Top
 
lewis
Middleweight
okay thanks for trying Chris :) The paint pic of my MW isn't un-useable, so if you decide to do these then do the lightweight first as it's too complicated for me to paint :lol:

Lightweight ~ Hit 'em Hard
The successor to Thwedge, with a better name, redesigned as a spinner-killer. It's now a Psychotron-style wedge (meaning that the wheels are protected from the front , but not from the sides or rear, but the wheels don't protrude past the sides of the wedge), but much shorter and steeper. The Toe-Crusher style axe is still at the back but the handle and axe head are thicker this time for anti-spinner holes to be drilled in, but the axehead is still double headed and retains the horizontal spikes too. The wedge is hinged on the drive axis, but also has two hinged spikes on the its front on either corner of the wedge, so these run flush to the ground because the wedge itself is already hinged. Works equally well either way up, and is dark blue with the name in yellow on the wedge. Spikes and axe are silver/grey.

Middleweight ~ Armageddon
Bad paint pic :(

Controlled rammer with front hinged wedges (all of same size) and rear anti-spinner ram. The black thingies are wheels and there are side skirts.

Thanks :)
Team Mechanical Menagerie
...prepare to be compressed
Offline Profile Quote Post Goto Top
 
prince palatine
Member Avatar
Narumeia Waifu Trash!
Hey there guys i thought i might as well get myself some CADS done as i might enter ARC Aftermath

Also im gonna need help on converting the stats to arc style

The Servant (LW for ARC)
Weight: 100kg
Shape: Mute (S7)
Colour: Blood Red
Dimensions: 67cm x 96cm x 26cm
Drive: 4x 24v S28-400 Magmotors powered by 5x NiCad Battlepacks
Locomotion: 4 Mute-style wheels.
Armour: 5mm titanium
Speed: 35mph
Ground Clearance: 0mm at front, 5mm elsewhere.
Turning Circle: 0m
Weapon: A full-pressure rear-hinged Co2 flipper(looks a lot like Chaos 2's) powered by a fire extinguisher using a 70mm bore 100mm stroke ram. It can flip 500kg.
Srimech: Flipper
Strengths: Very fast.
Weaknesses: Untested in battle
Bio: Essentially an updated Mute, Team Blood Mages' Servant is prepared to do some damage.
Win/Loss Ratio: N/A



Hammer & Nails 2 MW
Weight: 100kg
Shape: A box wedge, like Comengetorix (S6)
Colour: Black everywhere with a picture of a tool kit on the baseplate.
Dimensions: 133cm x 90cm x 40cm
Drive: 2 B42-500 Magmotors at 60v, putting out 60hp, powered by 4x NiCad battlepacks
Locomotion: 6 vulkanized rubber wheels with Aluminum hubs.
Armour: A 3.5mm Hardox chassis with 5mm Armox plates slit through slots in the chassis. Sort of like Bandwagon 3.
Speed: 17mph
Ground Clearance: 0mm at front, 5mm elsewhere.
Turning Circle: 0m
Weapon: 2 rack-and-pinion style axes, using a 120mm bore 180mm stroke ram and 2 2kg Co2 tanks. Each has a Hydra-style axehead with a diamond-tipped point. They can easily put out 1000kg, enough force to poke holes through steel.
Srimech: The axes.
Strengths: Tough armour, good axes, good design.
Weaknesses: None discovered yet.
Bio: V2 of Hammer & Nails uses 2 axes and Armox to get the job done.
Win/Loss Ratio: N/A


Dr. Thwack HW
Weight: 100kg
Shape: Biohazard.
Colour: Malachite green
Dimensions: 80cm x 75cm x 10cm
Drive: 4x 24v S28-400 Magmotors, powered by 3x 3000mAh NiCad Battlepacks
Locomotion: El Diablo Grande-style rubber tank tracks.
Armour: 4mm hardox
Speed: 20mph
Ground Clearance: 0mm all around thanks to 3mm titanium skirts. 5mm without skirts.
Turning Circle: 0m
Weapon: A 10kg pneumatic hammer, powered by a fire extinguisher using a 90mm bore 200mm stroke ram. It hits an opponent at 70mph.
Srimech: The hammer.
Strengths: Powerful weapon, nearly unflippable.
Weaknesses: Untested.
Bio: Lian Walsh's 2nd ever robot design.
Win/Loss Ratio: 1/0

Curse of the Deep SHW
Weight: 150kg
Shape: An angle-scoop front with sloped sides and rear wedge.
Colour: Emerald green.
Dimensions: 115cm x 90cm x 40cm
Drive: 2 LEM-130 motors, powered by 2 48v 3000mAh NiCad Battlepacks.
Locomotion: 2 100mm diameter CNC hubs with a 10mm thick layer of polyurethane stickied on them.
Armour: 7mm Hardox
Speed: 15mph
Ground Clearance: 0mm at front, 5mm elsewhere.
Turning Circle: 0m
Weapon: A powerful rack & pinion axe with a 5kg Terrorhurtz-style axehead, running on 250psi, and powered by 2 2kg Co2 tanks providing power for a 180mm bore 200mm stroke ram. The axe puts out around 1000kg of force, and can hit an opponent at either the front or back due to its rack & pinion design.
Srimech: The axe. The sides prevent it from being stranded.
Strengths: Big axe.
Weaknesses: Axes aren't that effective...
Bio: The Deep series becomes slightly less effective, but far more modern with the introduction of Curse of the Deep.
Win/Loss Ratio: N/A

any advice on converting stats to ARC style welcome (Wait a tick... This is a CAD request post, but oh well)
Team Ectogasm

Honours

Robot Attack LW Runner Up (With The Servant's Assistant)
FRR: Dead Zone LW Runner Up (With The Servant's Assistant)
Ruination: The Beginning joint third place (With The Servant's Assistant, Camo Alert and Hammer & Nailz)
Crazy Bots Blazing Ruin: MW Runner Up (Merry Hampton BR) and SHW CHAMPION!!! (F-Dynasty)
League of Robotic Excellence: MW 3rd place (Terminus) and LW CHAMPION!!! (The Servant's Assistant 3)
Ruination: The Omen: MW joint 3rd place (Merry Hampton BR) SHW joint 3rd place (Curse Of The Deep 2) and HW CHAMPION!!! (Klarinette)
Offline Profile Quote Post Goto Top
 
MadBull
Member Avatar
Superheavyweight
Lian, you realise today's the deadline for the signups dont you? :P

I dont have the time to do 4 CAD's today, nor to convert your stats for you, but I can give you the advice Ive also given on the FRA boards a while back regarding Mark's FRA/ARC tourney

my advise for Jordan and his translation to ARC style stats is to look where the focus of your robot bot is and rank your stats accordingly rather than just dive into a mathematical thing you cant solve. If you have 100 points to divide (hypothetical number) and believe your robot has a great weapon, medium armour and a bad speed and traction, just say Weapon=50, Armour=25, Speed=13 and Traction=12, all random numbers of course.
Posted Image
Offline Profile Quote Post Goto Top
 
prince palatine
Member Avatar
Narumeia Waifu Trash!
Ok thanks for the advice,

Maybe next time :D
Team Ectogasm

Honours

Robot Attack LW Runner Up (With The Servant's Assistant)
FRR: Dead Zone LW Runner Up (With The Servant's Assistant)
Ruination: The Beginning joint third place (With The Servant's Assistant, Camo Alert and Hammer & Nailz)
Crazy Bots Blazing Ruin: MW Runner Up (Merry Hampton BR) and SHW CHAMPION!!! (F-Dynasty)
League of Robotic Excellence: MW 3rd place (Terminus) and LW CHAMPION!!! (The Servant's Assistant 3)
Ruination: The Omen: MW joint 3rd place (Merry Hampton BR) SHW joint 3rd place (Curse Of The Deep 2) and HW CHAMPION!!! (Klarinette)
Offline Profile Quote Post Goto Top
 
Meganew
Member Avatar
ARC: Aftermath Survivor
Hey, Lian!

You might want to ask Area51Escapee if he can do them, or you could make pictures in MS Paint.

As for ARC stats, my suggestion would be:

The Servant:
Weapon: 3
Armour: 9
Traction: 5
Speed: 5

Hammer & Nails 2:
Weapon: 8(+4 power hammer bonus)
Armour: 7
Traction: 4
Speed: 3

Dr. Thwack:
Weapon: 7(+3 power hammer bonus)
Armour: 7
Traction: 4
Speed: 4

Curse of the Deep:
Weapon: 10(+5 power hammer bonus)
Armour: 7
Traction: 1
Speed: 4
Team Corsair

7-8 with my antweight, Top Gun.
Offline Profile Quote Post Goto Top
 
prince palatine
Member Avatar
Narumeia Waifu Trash!
Ok when hes online

Thanks for the help Mark as i kind of bad at this stuff :D
Team Ectogasm

Honours

Robot Attack LW Runner Up (With The Servant's Assistant)
FRR: Dead Zone LW Runner Up (With The Servant's Assistant)
Ruination: The Beginning joint third place (With The Servant's Assistant, Camo Alert and Hammer & Nailz)
Crazy Bots Blazing Ruin: MW Runner Up (Merry Hampton BR) and SHW CHAMPION!!! (F-Dynasty)
League of Robotic Excellence: MW 3rd place (Terminus) and LW CHAMPION!!! (The Servant's Assistant 3)
Ruination: The Omen: MW joint 3rd place (Merry Hampton BR) SHW joint 3rd place (Curse Of The Deep 2) and HW CHAMPION!!! (Klarinette)
Offline Profile Quote Post Goto Top
 
ajrobotics
Member Avatar
Middleweight
Hi Lian,

I was bored so I decided to draw The Servant for you. It's not very good, but feel free to use it if you want it.

Posted Image
Offline Profile Quote Post Goto Top
 
Sparkey989
Member Avatar
6/10
I might do Dr. Thwack if you want ;D
it would take me a day to do lol if you want it quality :D
words
Offline Profile Quote Post Goto Top
 
Meganew
Member Avatar
ARC: Aftermath Survivor
Lian, I've added The Servant's pic onto its page on my website.
Team Corsair

7-8 with my antweight, Top Gun.
Offline Profile Quote Post Goto Top
 
ajrobotics
Member Avatar
Middleweight
Is this any good for Hammer & Nails 2?

Posted Image
Offline Profile Quote Post Goto Top
 
Meganew
Member Avatar
ARC: Aftermath Survivor
Wow. AJ, you're pretty good at that particular CAD program.
Team Corsair

7-8 with my antweight, Top Gun.
Offline Profile Quote Post Goto Top
 
prince palatine
Member Avatar
Narumeia Waifu Trash!
Its perfect AJ :D
Team Ectogasm

Honours

Robot Attack LW Runner Up (With The Servant's Assistant)
FRR: Dead Zone LW Runner Up (With The Servant's Assistant)
Ruination: The Beginning joint third place (With The Servant's Assistant, Camo Alert and Hammer & Nailz)
Crazy Bots Blazing Ruin: MW Runner Up (Merry Hampton BR) and SHW CHAMPION!!! (F-Dynasty)
League of Robotic Excellence: MW 3rd place (Terminus) and LW CHAMPION!!! (The Servant's Assistant 3)
Ruination: The Omen: MW joint 3rd place (Merry Hampton BR) SHW joint 3rd place (Curse Of The Deep 2) and HW CHAMPION!!! (Klarinette)
Offline Profile Quote Post Goto Top
 
Area51Escapee
Member Avatar
Root Admin Wannabe
I did this in 5 minutes if you want to use it. I figured I'd just go ahead since we need to finalize our teams now.

Posted Image
"If you're talking about time travelling bunnies...then yes." - Ben, LOST
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Fantasy All Access · Next Topic »
Add Reply
  • Pages:
  • 1
  • 7

Black Water created by tiptopolive of the Zetaboards Theme Zone